Home / Tire sizes / 17-inch / 225/40R17

225/40R17 is 24.1 inches tall

A 225/40R17 tire measures 24.1 in (612 mm) in overall diameter and 8.9 in (225 mm) across, with a 3.5 in (90 mm) sidewall on a 17-inch wheel. It turns 837 times per mile.

Overall diameter
24.1 in
612 mm
Section width
8.9 in
225 mm
Sidewall height
3.5 in
90 mm, 40% of width
Revs per mile
837
520 per km

225/40R17 in inches and millimeters

DimensionInchesMillimeters
Section width8.9 in225 mm
Aspect ratio40%40% of width
Wheel diameter17 in432 mm
Sidewall height3.5 in90 mm
Overall diameter24.1 in612 mm
Circumference75.7 in1,922 mm
Revolutions per mile837520 per km

Cross-section to scale

225 mm Section width 612 mm Overall diameter 90 mm Sidewall R17 · 432 mm Rim diameter

Nominal dimensions from the size code. A real 225/40R17 varies about 1 to 2 percent by brand, tread depth and inflation pressure.

Sizes equivalent to 225/40R17

Common sizes within 3 percent of 24.1 in overall diameter and 20 mm of width: first on the same 17-inch wheel, then one wheel size up, then one down, nearest match first in each group. The speedometer column is what the dial reads at a true 60 mph.

SizeWheelDiameterDifferenceWidthSpeedo at 60
205/45R17 17 in 24.3 in +0.7% (+5 mm) -20 mm 59.6 mph Compare
215/40R17 17 in 23.8 in -1.3% (-8 mm) -10 mm 60.8 mph Compare
235/40R17 17 in 24.4 in +1.3% (+8 mm) +10 mm 59.2 mph Compare
215/45R17 17 in 24.6 in +2.2% (+14 mm) -10 mm 58.7 mph Compare
205/40R17 17 in 23.5 in -2.6% (-16 mm) -20 mm 61.6 mph Compare
245/40R17 17 in 24.7 in +2.6% (+16 mm) +20 mm 58.5 mph Compare
225/35R18 18 in 24.2 in +0.5% (+3 mm) 0 mm 59.7 mph Compare
215/35R18 18 in 23.9 in -0.7% (-4 mm) -10 mm 60.4 mph Compare
235/35R18 18 in 24.5 in +1.6% (+10 mm) +10 mm 59.0 mph Compare
245/35R18 18 in 24.8 in +2.8% (+17 mm) +20 mm 58.4 mph Compare
215/40R18 18 in 24.8 in +2.8% (+17 mm) -10 mm 58.3 mph Compare
205/50R16 16 in 24.1 in -0.1% (-0 mm) -20 mm 60.0 mph Compare

What 225/40R17 means

225 is the section width in millimeters (8.9 in). 40 is the aspect ratio: the sidewall is 40 percent of the width, so 225 × 0.40 = 90 mm (3.5 in). R is radial construction, and 17 is the wheel diameter in inches (432 mm). Stack two sidewalls on the wheel and you get the overall diameter: 432 + 2 × 90 = 612 mm, or 24.1 in.

A full marking adds a load index and speed rating after the size, for example 225/40R17 91V. Those two codes set how much weight and speed the tire is certified for; look them up in the load index chart and the speed rating chart.

Plus and minus sizing from 225/40R17

Going up one wheel size, the closest match is 225/35R18 at +0.5% diameter with a 79 mm sidewall instead of 90 mm. Going down one size, 205/50R16 is -0.1% with a taller 103 mm sidewall for more comfort and pothole margin. Anything inside 3 percent keeps the speedometer, ABS and gearing effectively stock; the comparison calculator shows the full speedometer table for any pair.

Frequently asked questions

How tall is a 225/40R17 tire?

24.1 inches (612 mm) in overall diameter: the 17-inch wheel (432 mm) plus two 90 mm sidewalls. Real tires land within about 1 to 2 percent of that depending on brand, tread depth and pressure.

What is 225/40R17 in inches?

24.1 x 8.9 R17: 24.1 inches tall, 8.9 inches wide, on a 17-inch wheel. The sidewall is 3.5 inches and the circumference is 75.7 inches, so the tire turns 837 times per mile.

What tire sizes are equivalent to 225/40R17?

Within 3 percent of the same diameter on the same 17-inch wheel: 205/45R17 (+0.7%), 215/40R17 (-1.3%), 235/40R17 (+1.3%); on an 18-inch wheel: 225/35R18 (+0.5%), 215/35R18 (-0.7%); on a 16-inch wheel: 205/50R16 (-0.1%). The percentage is the diameter change, which is also your speedometer error.

Can I use 235/40R17 instead of 225/40R17?

Dimensionally yes: 235/40R17 is 1.3% taller (+8 mm) and 10 mm wider, and at a true 60 mph the speedometer would read 59.2 mph. The extra width needs about 0.20 in of clearance on each side of the tire and a rim width that suits 235 mm.