Home / Tire sizes / 22-inch / 285/45R22

285/45R22 is 32.1 inches tall

A 285/45R22 tire measures 32.1 in (815 mm) in overall diameter and 11.2 in (285 mm) across, with a 5.0 in (128 mm) sidewall on a 22-inch wheel. It turns 628 times per mile.

Overall diameter
32.1 in
815 mm
Section width
11.2 in
285 mm
Sidewall height
5.0 in
128 mm, 45% of width
Revs per mile
628
390 per km

285/45R22 in inches and millimeters

DimensionInchesMillimeters
Section width11.2 in285 mm
Aspect ratio45%45% of width
Wheel diameter22 in559 mm
Sidewall height5.0 in128 mm
Overall diameter32.1 in815 mm
Circumference100.8 in2,561 mm
Revolutions per mile628390 per km

Cross-section to scale

285 mm Section width 815 mm Overall diameter 128 mm Sidewall R22 · 559 mm Rim diameter

Nominal dimensions from the size code. A real 285/45R22 varies about 1 to 2 percent by brand, tread depth and inflation pressure.

Sizes equivalent to 285/45R22

Common sizes within 3 percent of 32.1 in overall diameter and 20 mm of width: first on the same 22-inch wheel, then one wheel size up, then one down, nearest match first in each group. The speedometer column is what the dial reads at a true 60 mph.

SizeWheelDiameterDifferenceWidthSpeedo at 60
275/45R22 22 in 31.7 in -1.1% (-9 mm) -10 mm 60.7 mph Compare
305/40R22 22 in 31.6 in -1.5% (-13 mm) +20 mm 60.9 mph Compare
305/45R22 22 in 32.8 in +2.2% (+18 mm) +20 mm 58.7 mph Compare
275/50R22 22 in 32.8 in +2.3% (+19 mm) -10 mm 58.7 mph Compare
275/50R21 21 in 31.8 in -0.8% (-7 mm) -10 mm 60.5 mph Compare

What 285/45R22 means

285 is the section width in millimeters (11.2 in). 45 is the aspect ratio: the sidewall is 45 percent of the width, so 285 × 0.45 = 128 mm (5.0 in). R is radial construction, and 22 is the wheel diameter in inches (559 mm). Stack two sidewalls on the wheel and you get the overall diameter: 559 + 2 × 128 = 815 mm, or 32.1 in.

A full marking adds a load index and speed rating after the size, for example 285/45R22 91V. Those two codes set how much weight and speed the tire is certified for; look them up in the load index chart and the speed rating chart.

Plus and minus sizing from 285/45R22

No common 23-inch size stays within 3 percent of 32.1 in. Going down one size, 275/50R21 is -0.8% with a taller 138 mm sidewall for more comfort and pothole margin. Anything inside 3 percent keeps the speedometer, ABS and gearing effectively stock; the comparison calculator shows the full speedometer table for any pair.

Which cars come with 285/45R22

Typical factory fitments include Ram 1500 22-inch. Tire size changes with trim and wheel option, so confirm on the door-jamb placard before buying.

Frequently asked questions

How tall is a 285/45R22 tire?

32.1 inches (815 mm) in overall diameter: the 22-inch wheel (559 mm) plus two 128 mm sidewalls. Real tires land within about 1 to 2 percent of that depending on brand, tread depth and pressure.

What is 285/45R22 in inches?

32.1 x 11.2 R22: 32.1 inches tall, 11.2 inches wide, on a 22-inch wheel. The sidewall is 5.0 inches and the circumference is 100.8 inches, so the tire turns 628 times per mile.

What tire sizes are equivalent to 285/45R22?

Within 3 percent of the same diameter on the same 22-inch wheel: 275/45R22 (-1.1%), 305/40R22 (-1.5%), 305/45R22 (+2.2%); on a 21-inch wheel: 275/50R21 (-0.8%). The percentage is the diameter change, which is also your speedometer error.

Can I use 305/40R22 instead of 285/45R22?

Dimensionally yes: 305/40R22 is 1.5% shorter (-13 mm) and 20 mm wider, and at a true 60 mph the speedometer would read 60.9 mph. The extra width needs about 0.39 in of clearance on each side of the tire and a rim width that suits 305 mm.