GarageCalc What 295/35R21 means
295 is the section width in millimeters (11.6 in). 35 is the aspect ratio: the sidewall is 35 percent of the width, so 295 × 0.35 = 103 mm (4.1 in). R is radial construction, and 21 is the wheel diameter in inches (533 mm). Stack two sidewalls on the wheel and you get the overall diameter: 533 + 2 × 103 = 740 mm, or 29.1 in.
A full marking adds a load index and speed rating after the size, for example 295/35R21 91V. Those two codes set how much weight and speed the tire is certified for; look them up in the load index chart and the speed rating chart.
Plus and minus sizing from 295/35R21
Similar diameter does not establish interchangeability. Follow the vehicle manufacturer's approved sizes; see Michelin's tire-size guidance.
Going up one wheel size, the closest match is 285/35R22 at +2.5% diameter with a 100 mm sidewall instead of 103 mm. Going down one size, 285/40R20 is -0.5% with a taller 114 mm sidewall for more comfort and pothole margin. The 3 percent cutoff is a comparison filter, not a fitment approval. Use vehicle-approved sizes and check rim width, load and speed ratings, and clearances. The comparison calculator shows the full speedometer table for any pair.
For the effect on road speed and distance, see our worked speedometer example. When maintaining this set, use the rotation pattern guide to check whether tire direction or different front and rear sizes restrict rotation.
Frequently asked questions
How tall is a 295/35R21 tire?
29.1 inches (740 mm) in overall diameter: the 21-inch wheel (533 mm) plus two 103 mm sidewalls. Actual dimensions depend on the tire model, tread depth, pressure and load; check the tire manufacturer specifications.
What is 295/35R21 in inches?
29.1 x 11.6 R21: 29.1 inches tall, 11.6 inches wide, on a 21-inch wheel. The sidewall is 4.1 inches and the circumference is 91.5 inches, so the tire turns 692 times per mile.
What tire sizes are equivalent to 295/35R21?
Within 3 percent of the same diameter on the same 21-inch wheel: 285/35R21 (-0.9%), 305/35R21 (+0.9%), 275/40R21 (+1.8%); on a 22-inch wheel: 285/35R22 (+2.5%); on a 20-inch wheel: 285/40R20 (-0.5%), 295/40R20 (+0.6%). These are nominal diameter comparisons, not approved replacements. Check vehicle-approved sizes, rim width, load and speed ratings, and clearance before changing size.
Can I use 305/35R21 instead of 295/35R21?
Nominal size comparison only: 305/35R21 is 0.9% taller (+7 mm) and 10 mm wider, and at a true 60 mph the speedometer would read 59.4 mph. This does not confirm fitment. Check approved rim widths, load and speed ratings, and vehicle clearances. On the same wheel centerline, the extra nominal width uses about 0.20 in more space on each side, reducing clearance. Actual section width also depends on the tire model and rim width.