GarageCalc What 295/70R18 means
295 is the section width in millimeters (11.6 in). 70 is the aspect ratio: the sidewall is 70 percent of the width, so 295 × 0.70 = 207 mm (8.1 in). R is radial construction, and 18 is the wheel diameter in inches (457 mm). Stack two sidewalls on the wheel and you get the overall diameter: 457 + 2 × 207 = 870 mm, or 34.3 in.
A full marking adds a load index and speed rating after the size, for example 295/70R18 91V. Those two codes set how much weight and speed the tire is certified for; look them up in the load index chart and the speed rating chart.
Plus and minus sizing from 295/70R18
No common 19-inch size stays within 3 percent of 34.3 in. Going down one size, 315/70R17 is +0.3% with a taller 221 mm sidewall for more comfort and pothole margin. Anything inside 3 percent keeps the speedometer, ABS and gearing effectively stock; the comparison calculator shows the full speedometer table for any pair.
Frequently asked questions
How tall is a 295/70R18 tire?
34.3 inches (870 mm) in overall diameter: the 18-inch wheel (457 mm) plus two 207 mm sidewalls. Real tires land within about 1 to 2 percent of that depending on brand, tread depth and pressure.
What is 295/70R18 in inches?
34.3 x 11.6 R18: 34.3 inches tall, 11.6 inches wide, on an 18-inch wheel. The sidewall is 8.1 inches and the circumference is 107.6 inches, so the tire turns 589 times per mile.
What tire sizes are equivalent to 295/70R18?
Within 3 percent of the same diameter on the same 18-inch wheel: 285/70R18 (-1.6%), 305/70R18 (+1.6%); on a 17-inch wheel: 315/70R17 (+0.3%), 285/75R17 (-1.3%). The percentage is the diameter change, which is also your speedometer error.
Can I use 305/70R18 instead of 295/70R18?
Dimensionally yes: 305/70R18 is 1.6% taller (+14 mm) and 10 mm wider, and at a true 60 mph the speedometer would read 59.0 mph. The extra width needs about 0.20 in of clearance on each side of the tire and a rim width that suits 305 mm.