GarageCalc What 285/40R19 means
285 is the section width in millimeters (11.2 in). 40 is the aspect ratio: the sidewall is 40 percent of the width, so 285 × 0.40 = 114 mm (4.5 in). R is radial construction, and 19 is the wheel diameter in inches (483 mm). Stack two sidewalls on the wheel and you get the overall diameter: 483 + 2 × 114 = 711 mm, or 28.0 in.
A full marking adds a load index and speed rating after the size, for example 285/40R19 91V. Those two codes set how much weight and speed the tire is certified for; look them up in the load index chart and the speed rating chart.
Plus and minus sizing from 285/40R19
Going up one wheel size, the closest match is 285/35R20 at -0.4% diameter with a 100 mm sidewall instead of 114 mm. No common 18-inch size stays within 3 percent either. Anything inside 3 percent keeps the speedometer, ABS and gearing effectively stock; the comparison calculator shows the full speedometer table for any pair.
Frequently asked questions
How tall is a 285/40R19 tire?
28.0 inches (711 mm) in overall diameter: the 19-inch wheel (483 mm) plus two 114 mm sidewalls. Real tires land within about 1 to 2 percent of that depending on brand, tread depth and pressure.
What is 285/40R19 in inches?
28.0 x 11.2 R19: 28.0 inches tall, 11.2 inches wide, on a 19-inch wheel. The sidewall is 4.5 inches and the circumference is 87.9 inches, so the tire turns 721 times per mile.
What tire sizes are equivalent to 285/40R19?
Within 3 percent of the same diameter on the same 19-inch wheel: 275/40R19 (-1.1%), 295/40R19 (+1.1%), 305/35R19 (-2.0%); on a 20-inch wheel: 285/35R20 (-0.4%), 295/35R20 (+0.5%). The percentage is the diameter change, which is also your speedometer error.
Can I use 295/40R19 instead of 285/40R19?
Dimensionally yes: 295/40R19 is 1.1% taller (+8 mm) and 10 mm wider, and at a true 60 mph the speedometer would read 59.3 mph. The extra width needs about 0.20 in of clearance on each side of the tire and a rim width that suits 295 mm.