GarageCalc What 285/45R19 means
285 is the section width in millimeters (11.2 in). 45 is the aspect ratio: the sidewall is 45 percent of the width, so 285 × 0.45 = 128 mm (5.0 in). R is radial construction, and 19 is the wheel diameter in inches (483 mm). Stack two sidewalls on the wheel and you get the overall diameter: 483 + 2 × 128 = 739 mm, or 29.1 in.
A full marking adds a load index and speed rating after the size, for example 285/45R19 91V. Those two codes set how much weight and speed the tire is certified for; look them up in the load index chart and the speed rating chart.
Plus and minus sizing from 285/45R19
Going up one wheel size, the closest match is 285/40R20 at -0.4% diameter with a 114 mm sidewall instead of 128 mm. No common 18-inch size stays within 3 percent either. Anything inside 3 percent keeps the speedometer, ABS and gearing effectively stock; the comparison calculator shows the full speedometer table for any pair.
Frequently asked questions
How tall is a 285/45R19 tire?
29.1 inches (739 mm) in overall diameter: the 19-inch wheel (483 mm) plus two 128 mm sidewalls. Real tires land within about 1 to 2 percent of that depending on brand, tread depth and pressure.
What is 285/45R19 in inches?
29.1 x 11.2 R19: 29.1 inches tall, 11.2 inches wide, on a 19-inch wheel. The sidewall is 5.0 inches and the circumference is 91.4 inches, so the tire turns 693 times per mile.
What tire sizes are equivalent to 285/45R19?
Within 3 percent of the same diameter on the same 19-inch wheel: 265/50R19 (+1.2%), 275/45R19 (-1.2%), 275/50R19 (+2.5%); on a 20-inch wheel: 285/40R20 (-0.4%), 295/40R20 (+0.7%). The percentage is the diameter change, which is also your speedometer error.
Can I use 295/40R19 instead of 285/45R19?
Dimensionally yes: 295/40R19 is 2.8% shorter (-21 mm) and 10 mm wider, and at a true 60 mph the speedometer would read 61.7 mph. The extra width needs about 0.20 in of clearance on each side of the tire and a rim width that suits 295 mm.