Home / Tire sizes / 19-inch / 295/30R19

295/30R19 is 26.0 inches tall

A 295/30R19 tire measures 26.0 in (660 mm) in overall diameter and 11.6 in (295 mm) across, with a 3.5 in (89 mm) sidewall on a 19-inch wheel. It turns 777 times per mile.

Overall diameter
26.0 in
660 mm
Section width
11.6 in
295 mm
Sidewall height
3.5 in
89 mm, 30% of width
Revs per mile
777
483 per km

295/30R19 in inches and millimeters

DimensionInchesMillimeters
Section width11.6 in295 mm
Aspect ratio30%30% of width
Wheel diameter19 in483 mm
Sidewall height3.5 in89 mm
Overall diameter26.0 in660 mm
Circumference81.6 in2,072 mm
Revolutions per mile777483 per km

Cross-section to scale

295 mm Section width 660 mm Overall diameter 89 mm Sidewall R19 · 483 mm Rim diameter

Nominal dimensions from the size code. A real 295/30R19 varies about 1 to 2 percent by brand, tread depth and inflation pressure.

Sizes equivalent to 295/30R19

Common sizes within 3 percent of 26.0 in overall diameter and 20 mm of width: first on the same 19-inch wheel, then one wheel size up, then one down, nearest match first in each group. The speedometer column is what the dial reads at a true 60 mph.

SizeWheelDiameterDifferenceWidthSpeedo at 60
285/30R19 19 in 25.7 in -0.9% (-6 mm) -10 mm 60.6 mph Compare
305/30R19 19 in 26.2 in +0.9% (+6 mm) +10 mm 59.5 mph Compare
275/30R19 19 in 25.5 in -1.8% (-12 mm) -20 mm 61.1 mph Compare
275/35R19 19 in 26.6 in +2.3% (+16 mm) -20 mm 58.6 mph Compare
275/30R20 20 in 26.5 in +2.0% (+13 mm) -20 mm 58.8 mph Compare
285/30R20 20 in 26.7 in +2.9% (+19 mm) -10 mm 58.3 mph Compare
285/35R18 18 in 25.9 in -0.4% (-3 mm) -10 mm 60.3 mph Compare
295/35R18 18 in 26.1 in +0.6% (+4 mm) 0 mm 59.6 mph Compare
275/35R18 18 in 25.6 in -1.5% (-10 mm) -20 mm 60.9 mph Compare
305/35R18 18 in 26.4 in +1.7% (+11 mm) +10 mm 59.0 mph Compare
275/40R18 18 in 26.7 in +2.7% (+18 mm) -20 mm 58.4 mph Compare

What 295/30R19 means

295 is the section width in millimeters (11.6 in). 30 is the aspect ratio: the sidewall is 30 percent of the width, so 295 × 0.30 = 89 mm (3.5 in). R is radial construction, and 19 is the wheel diameter in inches (483 mm). Stack two sidewalls on the wheel and you get the overall diameter: 483 + 2 × 89 = 660 mm, or 26.0 in.

A full marking adds a load index and speed rating after the size, for example 295/30R19 91V. Those two codes set how much weight and speed the tire is certified for; look them up in the load index chart and the speed rating chart.

Plus and minus sizing from 295/30R19

Going up one wheel size, the closest match is 275/30R20 at +2.0% diameter with a 83 mm sidewall instead of 89 mm. Going down one size, 285/35R18 is -0.4% with a taller 100 mm sidewall for more comfort and pothole margin. Anything inside 3 percent keeps the speedometer, ABS and gearing effectively stock; the comparison calculator shows the full speedometer table for any pair.

Frequently asked questions

How tall is a 295/30R19 tire?

26.0 inches (660 mm) in overall diameter: the 19-inch wheel (483 mm) plus two 89 mm sidewalls. Real tires land within about 1 to 2 percent of that depending on brand, tread depth and pressure.

What is 295/30R19 in inches?

26.0 x 11.6 R19: 26.0 inches tall, 11.6 inches wide, on a 19-inch wheel. The sidewall is 3.5 inches and the circumference is 81.6 inches, so the tire turns 777 times per mile.

What tire sizes are equivalent to 295/30R19?

Within 3 percent of the same diameter on the same 19-inch wheel: 285/30R19 (-0.9%), 305/30R19 (+0.9%), 275/30R19 (-1.8%); on a 20-inch wheel: 275/30R20 (+2.0%), 285/30R20 (+2.9%); on an 18-inch wheel: 285/35R18 (-0.4%), 295/35R18 (+0.6%). The percentage is the diameter change, which is also your speedometer error.

Can I use 305/30R19 instead of 295/30R19?

Dimensionally yes: 305/30R19 is 0.9% taller (+6 mm) and 10 mm wider, and at a true 60 mph the speedometer would read 59.5 mph. The extra width needs about 0.20 in of clearance on each side of the tire and a rim width that suits 305 mm.