GarageCalc Where 4x114.3 is used
4x114.3 appears on 15 vehicles from 5 makes in this list: Nissan accounts for 7, Mitsubishi for 3 and Honda for 2. The earliest fitment here is the Datsun 240Z / 260Z / 280Z from 1970, and none of the listed models still use it, so this is a pattern you meet on used vehicles.
What else has to match
A matching bolt pattern is the first of four checks, not the last. The wheel's center bore has to match the hub, or be bridged with a hub-centric ring, so the hub carries the wheel instead of the studs. The offset decides whether the tire clears the suspension and stays inside the fender; run the numbers in the wheel offset calculator before buying. And the lug seats must match the wheel: conical, ball or flat seats are not interchangeable even when the thread is. None of those values are fixed by 4x114.3 itself, so check them per vehicle.
Frequently asked questions
What is 4x114.3 in inches?
4x114.3 is 4x4.5 in inches: 4 lugs on a 4.5 inch circle (114.3 mm divided by 25.4). It is the same pattern in different units, and 4x4.5 is how US wheel listings usually label it.
What cars have a 4x114.3 bolt pattern?
Nissan 240SX (1989-1998), Honda Accord (1982-1997), Mitsubishi Lancer (2002-2007), Nissan Sentra (2000-2019), Nissan Altima (1993-2001), Nissan Maxima (1989-1999), Nissan Cube (2009-2014), Honda Prelude (1983-1996), Datsun 240Z / 260Z / 280Z (1970-1978), Nissan 280ZX (1979-1983), Nissan 300ZX (1984-1989), Mitsubishi Eclipse (1990-1999), and 3 more in the table on this page. Always confirm on your own vehicle: the pattern can change between generations, trims and markets.
Is 4x114.3 the same as 4x110?
No. 4x110 is 4.3 mm smaller in diameter. That is enough to seat every lug off-center, so the wheel is held by the lug hardware rather than by matching geometry and can work loose. Fit only wheels that are exactly 4x114.3, or hub-centric wheels with wobble bolts made for that specific mismatch.